Permanently and securely attach your Park Tool Repair Stand to the floor of your shop with the Park Tool FP-2 Floor Plate. Made with an 8" square of steel, it attaches to stand with four bolts, which are included. The FP-2 has 11/32" holes on 7" centers at each corner.
Park Tool FR-1.3 Freewheel Remover
12 splines, 22.6mm diameter fits Shimano®, Sachs® Aris, Sun Race®, DNP® Epoch and other 5–10 speed freewheels. The Park Tool FR-1.3 Freewheel Remover includes an enlarged thru-hole to accommodate 14mm axles.
Park Tool FR-2 Freewheel Remover Sun Tour 2 Pin
The Park Tool FR-2 Freewheel Remover is made from heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. Park Tool FR-2 Freewheel Remover Features Fits older Sun Tour® two notch freewheels Two notches are...
Park Tool FR-3 Freewheel Remover 4 Pin
The Park Tool FR-2 Freewheel Remover is made from heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. Park Tool FR-2 Freewheel Remover Features Part of a comprehensive range of freewheel removal tools Oversized...
Park Tool FR-4 Freewheel Remover
The Park Tool FR-4 Freewheel Remover is made from heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. Park Tool FR-4 Freewheel Remover Features Part of a comprehensive range of freewheel removal tools Oversized...
Park Tool FR-5.2 Cassette Lockring Tool
This cassette lockring tool from Park Tool is an essential tool for the fitting/removal of your cassette and can also be used to fit and remove centre-lock brake discs.Fits Shimano, SRAM (including 1x), SunRace, SunTour, Chris King and other cassette lockringsAlways use a quick release skewer to hold...
Park Tool FR52G Cassette Lockring Tool
This updated cassette lockring tool from Park Tool is an essential tool for the fitting/removal of your cassette and can also be used to fit and remove centre-lock brake discs. It now also fits the SRAM XX1 11-speed cassettes.Fits Shimano, SRAM (including 1x), SunRace, SunTour, Chris King and other cassette...
Park Tool FR-5.2GT Cassette Locking Tool with 12mm PIN
The FR-5.2GT has been specifically designed for removing and installing cassette lockrings from thru axle hubs. It uses a 12mm guide pin to help stabilise the tool while in use making it easier for you to use. This cassette lockring tool fits 12 spline cassette lockrings ranging from Shimano, SRAM...
Park Tool FR-5.2GT Cassette Tool with 12mm Pin
ThePark Tool FR-5.2GT Cassette Tool with 12mm Pinis designed specifically for use when removing and installing cassette lockrings from thru axle hubs. Park Tool FR-5.2GT Cassette Tool with 12mm Pin Features Utilizes a 12mm guide pin to stabilize the tool in use Fits 12-spline cassette lockrings...
Park Tool Fr-6 Bmx Freewheel Remover
Oversized centre hole and thin wall design allows use without removal of cones and locknuts Oversized centre hole and thin wall design allows use without removal of cones and locknuts Investment cast and heat-treated for strength and durability 1' base fits end of SR-1 FRW-1 Park tools or simply...
Park Tool FR-6 Freewheel Remover
The Park Tool FR-6 Freewheel Remover is made of heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. Park Tool FR-6 Freewheel Remover Features Removes four-notch BMX / single-speed freewheel from hubs with 1.37...
Park Tool Frame & Forks End Alignment Gauge Set Ffg2
Improperly aligned frame or fork dropouts can cause bent axles and quick-release skewers as well as tracking and shifting problems. The FFG-2 quickly determines whether rear frame or front fork dropouts are aligned and parallel. If an error is detected long handles and comfortable molded grips afford...
Park Tool Freewheel Remover/Bottom Bracket Tool
The Park Tool Freewheel Remover/Bottom Bracket Tool is made from heat treated alloy tool steel with a one inch base which fits wrench or bench vice. Thin wall construction allows use without removal of cones and locknuts. Park Tool Freewheel Remover/Bottom Bracket Tool Features Part of a comprehensive...
Park Tool FRW-1 Freewheel Remover Wrench
The Park ToolFRW-1Freewheel Remover Wrenchis a one-inch socket and securely holds freewheel and lockring tools (FR-1 through FR-8 plus the BBT-5) for removal and installation. Features an investment cast head with locking knob and a long, round, vinyl dipped handle for superior leverage.
A simple brush design that makes it easier to keep your transmission cleanCurved and toothed end for cleaning out between sprocketsStiff nylon bristles for thorough cleaning of derailleurs and chainAlso handy for cleaning behind V-brakes and other hard to reach places