DT Swiss L2 Remote Lever - Black
Control the damping system of your suspension to trigger your speed. The ergonomics of the L2 Remote Lever are designed to allow riders to be more responsive to these changing conditions, wasting no time with a precise and natural movement. The L2 Remote Lever allows you to adjust the damping modes of...
Fox Remote Lockout 2-Pos Dual Pull - Black / Bar Clamp
Fox Remote Lockout 2-Pos Dual Pull. Fox Part Number: 820-07-150 . Kit is for one cable and one barrel only. Mount: 22.2mm Bar Clamp or Shimano I-Spec EV Clamp. Single Cable.
Fox Remote Lockout 2-Pos Dual Pull - Black / I-Spec EV Clamp
Fox Remote Lockout 2-Pos Dual Pull. Fox Part Number: 820-07-150 . Kit is for one cable and one barrel only.
Fox Remote Lockout 2-Pos Dual Pull - Dual Cable - Black / I-Spec EV Clamp
Fox Remote Lockout 2-Pos Dual Pull. Kit is for two cable and one barrel only. Mount: Shimano I-Spec EV Clamp. Dual Cable.
Profin Fox CTD DPS Volume Spacers - Pack Of 5 - Pack Of 5
The Profin Fox CTD volume tokens are 3D printed from a high quality chemical and oil resistant polymer - PETG, which is used for drinks bottles, chemical containers, fuel tanks etc. The Profin Fox CTD /DPS Volume Spacers are a aftermarket equivalent to Fox 803-01-250 for 9mm shaft. Volume spacers...
Profin Fox DPX2 / Float X Volume Spacers Tokens - Pack Of 5 - Pack Of 5
The Profin Fox volume spacers are 3D printed in house. The volume spacers are manufactured from high quality chemical and oil resistant polymer - PETG, which is used for drinks bottles, chemical containers, fuel tanks etc. Profin do not use PLA in any of there 3D printed products. The Profin Fox...
Profin Fox Eyelet Torque Tool - Silver
This tool allows you to correctly torque the eyelet on your Fox rear shock when servicing. It's an essential maintenance tool for both the Professional and home mechanic. Made from Stainless Steel it is manufactured at Profins workshop in Lancashire. The design has been modified from that of...
Profin Fox Float X2 Volume Spacers - Pack Of 3 - Pack Of 3
The Profin Fox Float X2 volume spacers are 3D printed at Profins Lancashire HQ. Made 95% PETg the Float X2 spacers that are an aftermarket alternative to Fox Part numbers 803-01-139 and 233-00-240. The spacers help to increases the spring curve of your shock, keeping the shock active at the start...
Profin Rockshox 35mm Volume Spacers -
Profin 3D printed Rockshox compatible bottomless tokens made from 95% PETG. The Profing volume spacers help to tune your ride to your liking, rather than just adding a whole other token you can use the small and medium tokens to maximise small bump compliance but at the same time avoid bottoming out....
Profin Rockshox DLX / SLDX Tokens - Pack Of 3
Profin Rockshox Deluxe Super Deluxe Tokens 2017+. Fits both the Fox DLX and SDLX rear shocks. The Profin Rockshox Deluxe Super Deluxe volume spacers are supplied in a pack of 3 and are manufactured by Profin Components in Lancashire. These are an aftermarket alternative to Rockshox Part 11.4118.042.001....
Profin Rockshox Monarch / Vivid Volume Spacers - Pack Of 9 - Blue / Pack Of 9
Profin Rockshox Monarch and Rockshox Vivid Air Volume Spacer Bottomless Tokens Elastic, Durable, Easy to Fit.. Supplied in a pack of 9. These are made in house at Profin's workshop in Lancashire from a durable rubber material. They are an aftermarket alternative to Rockshox part number 11.4118.042.000.
Profin Trunnion Bolt Conversion Kit - Silver / 40mm
These kits allow you to fit a 1/2" eyelet shock (Fox, Rockshox, DVO etc.) on a bike originally fitted with a Trunnion shock. Available in 40mm, 50mm and 54mm widths and threaded to accept 10mm Trunnion Bolts.. Each kit contains 2 x spacers, 1 x low friction poly bushing and 1 x stainless steel...
Profin Trunnion Bolt Conversion Kit - Silver / 50mm
These kits allow you to fit a 1/2" eyelet shock (Fox, Rockshox, DVO etc.) on a bike originally fitted with a Trunnion shock. Available in 40mm, 50mm and 54mm widths and threaded to accept 10mm Trunnion Bolts.. Each kit contains 2 x spacers, 1 x low friction poly bushing and 1 x stainless steel...
Profin Trunnion Bolt Conversion Kit - Silver / 50mm Offset
These kits allow you to fit a 1/2" eyelet shock (Fox, Rockshox, DVO etc.) on a bike originally fitted with a Trunnion shock. Available in 40mm, 50mm and 54mm widths and threaded to accept 10mm Trunnion Bolts.. Each kit contains 2 x spacers, 1 x low friction poly bushing and 1 x stainless steel...
Profin Trunnion Bolt Conversion Kit - Silver / 54mm
These kits allow you to fit a 1/2" eyelet shock (Fox, Rockshox, DVO etc.) on a bike originally fitted with a Trunnion shock. Available in 40mm, 50mm and 54mm widths and threaded to accept 10mm Trunnion Bolts.. Each kit contains 2 x spacers, 1 x low friction poly bushing and 1 x stainless steel...