Park Tool Bts1 - Bottom Bracket Tapping And Facing Set
A precision tool that provides a piloted means of tapping threads in a bottom bracket shell. Includes English taps 1.370 inch x 24 tpi right hand thread for adjustable cup and 1.370 inch x 24 tpi left hand thread for fixed cup Italian thread taps 36mm x 24 tpi right hand thread are also available After...
Park Tool Htr1b - Head Tube Reaming And Facing Set: 1-1 / 8 Inch Included
The HTR-1B combines reaming and/or facing of the head tube to create a perfect fit for most sizes of headset cups. The HTR-1B comes complete with a 33.8mm reamer and four different size pilots 29.8mm 30.0mm 33.8mm and 36.8mm The reamer is used to clean out or increase the diameter of the head tube Most...
Park Tool Crown Race Cutting Tool
Perfect headset performance requires accurate machining of the fork crown race and this is the tool to do it. Cuts the outer edge and lower surface of the crown race seat A simple adjusting system allows the tool to be a tight fit on all forks threaded or unthreaded including those with externally butted...
Park Tool 758.2 - Cutter And Reamer 1.5 Inch Headsets For Htr1 & Htr1b
The Park Tool 758.2 will ream and face the head tubes of bikes that use the OnePointFive Interface StandardThe 758.2 is designed for use with the Park Tool HTR-1 or HTR-1B Headtube Facer and ReamerMust also be used with the 750 Centering Cone Adaptor to ensure correct alignment1.9516-inch 49.57mm...
Park Tool Frame & Forks End Alignment Gauge Set Ffg2
Improperly aligned frame or fork dropouts can cause bent axles and quick-release skewers as well as tracking and shifting problems. The FFG-2 quickly determines whether rear frame or front fork dropouts are aligned and parallel. If an error is detected long handles and comfortable molded grips afford...
Park Tool 690-xl - Cutter Low-profile Headsets For Htr1
Facing improves the alignment of bearings in the headsetThe 690-XL has an approximate diameter of 58 mm and is a larger version of the 690 facer for facing head tubes with low profile Zero Stack type headsetsMust be used with the 768 pilot to ensure the frame is reamed and faced accurately
Park Tools Frame & Forks Straightener
A controlled way to straighten frames forks cranks and handlebars when feasible. Nylon coated hook and fulcrum to prevent paint damage The hook has up to 8' of adjustment for ideal positioning Re-enforced and super stiff design resists flexing To be used with care especially on high-end or thin-walled...
Park Tools Crown Race Setting System 1 Inch-1 1/8 Inch
The CRS-1 is a professional tool set for installation of crown races onto forks with 1' and 1 1/8' steering columns. Using the long strong driver tube one of the included drifts and a hammer or mallet not included the CRS-1 safely and accurately drives the crown race into its properly seated...
Park Tool Scw-set.3 Shop Cone Wrench Set
Industry standard cone wrenches with unmatched performance. The Y-head design puts material where it is needed for strength and durability Military grade phosphate finish ensures an accurate fit and consistent quality Thin enough to be used on the narrowest of cones High strength tool steel Long vinyl...
Park Home Mechanic Bearing Cup Press
Simple and great value for money! The HHP-3 is designed to install all sizes of head cups and one-piece bottom bracket cups into frames. Prolong the life of your bearings by installing them correctly from the start Made in the USA and covered by Park Tool's legendary limited lifetime warranty
Seats tyre beads into rim quickly and easily. Long vinyl coated handles give plenty of leverage Perfect for tubeless tyres or stubborn downhill tyre and rim combinations Make workshop life even easier on your thumbs Made in the USA and covered by Park Tool's legendary limited lifetime warranty
Park Fourth Hand Cable Stretcher - With Locking Ratchet
Commonly referred to as a “4th Hand” the Park Tool Cable Stretcher pulls cables tight for adjustment of derailleurs and brakes. It features one-hand operation with a thumb lock to hold the cable tight while your hand is freed up to tighten bolts and nuts. A must-have for any shop home or...
Park Tool Threadless Forks Saw Guide
Cut any threadless fork steerer quickly and accurately with this handy saw guide. You can easily remove as little as 1mm from the fork steerer length for perfect headset installation and adjustment. Heat treated for long life The composite body will not damage the fork's steerer but has steel threads...
Park Tool Sg8 - Threadless Fork Saw Guide For Carbon Cutting Blades
Cut any threadless fork steerer quickly and accurately with this handy saw guide. Slotted especially for thicker carbon cutting blades which do not fit in standard cutting guides. You can easily remove as little as 1mm from the carbon steerer length for perfect headset installation and adjustment. Heat...
Park Tool Bbt90.3 - Press Fit Bottom Bracket Bearing Tool Set
The BBT-90.3 Press Fit Bottom Bracket Bearing Tool Set is designed for installation and removal of bearings and bearing units used in BB90 BB92 Shimano® press fit SRAM® press fit GXP® Race Face® press fit and other press fit bottom bracket systems. The BBT-90.3 includes a bearing removal...