Outer Gear Casing Cap Sealed 4mm - Pack of 6
Pack of 6 sealed outer casing end caps for use with gear outer casing. Suitable for SP40 / 41 outer casing with 4 mm outer diameter. Tongue and shield caps prevent ingress of corrosion-causing water and dirt into cable outer.
1 x steel inner gear cables for smooth and lasting shifting performance. Steel inner wire with anti corrosion treatment. For use with 4 mm outer casing (e.g. SIS-SP / SP40 / SP41 / SP51). Suitable for front or rear mechs, just cut to fit. 1.2 mm x 2100 mm. ...
Shimano TLFC16 Hollowtech 2 Crank Installation Tool
Shimano TLFC16 tool for the installation of Hollowtech 2 crank arms. .
Shimano Di2 SM-GM02 Grommets - Pack Of 4 - Black
E-tube Di2 internal cable routing grommets to protect the wires as they enter the frame from snagging. Protective solution that is quick and easy to install. Pack of 4 to fit 7 x 8 mm oval frame hole diameter.
Shimano Crank Installation Tool For Hollowtech 2
Designed specifically for the removal and installation of HollowTech II chainsets and Bottom brackets
Shimano RS505 Caliper Fixing Bolt - Black / Frame Thickness 30mm - Bolt Length 43mm
Geniune Shimano RS505 Caliper Fixing Bolt C for the below disc brake calipers Compatible With Shimano brakes: Shimano BR-RS805. Shimano BR-RS405. Shimano BR-RS305. Sizes 38mm bolt for use with 25mm frame. 33mm bolt for use with 20mm frame. 48mm bolt for use with 35mm frame.
Shimano RS505 Caliper Fixing Bolt - Black / Frame Thickness 35mm - Bolt Length 48mm
Geniune Shimano RS505 Caliper Fixing Bolt C for the below disc brake calipers Compatible With Shimano brakes: Shimano BR-RS805. Shimano BR-RS405. Shimano BR-RS305. Sizes 38mm bolt for use with 25mm frame. 33mm bolt for use with 20mm frame. 48mm bolt for use with 35mm frame.
Shimano Stainless Inner Gear Wire
Stainless steel precision ground round inner wires offer smooth low friction shift action with increased service life due to its anti-corrosion nature. For use with 4 mm outer casing (e.g. SIS-SP / SP40 / SP41 / SP51). Suitable for front or rear mechs, just cut to fit. 1.2 mm x 2100 mm. Suitable...
Shimano SP41 SIS Outer Gear Casing - Black / 1 Metre
Genuine Shimano SP41 gear outer. Supplied in 1 metre lenghts. If you order more than that one metre we will supply uncut lengths, so you can have a full length of 5 metres if needed. To order longer lengths simply adjust the quantity in your basket.
Shimano SLX M675 10 Speed Chainrings - 24T / 4 Arm, 64mm
Genuine Shimano replacement chainrings. For the chainset FCM675, SLX double. The 24t inner is also used on the FCM675 SLX triple.
Shimano SLX M675 10 Speed Chainrings - 26T / 4 Arm, 64mm
Genuine Shimano replacement chainrings. For the chainset FCM675, SLX double. The 24t inner is also used on the FCM675 SLX triple.
Shimano Disc Brake Brackets - Black / Post Mount Front 203mm
Front and rear Shimano disc brake adapters. Take the standard 160mm post mount caliper to the required fitting/rotor size. Can be used with other manufacturers (but not all) disc brakes.
Shimano Disc Brake Brackets - Black / Front 180mm IS to IS
Front and rear Shimano disc brake adapters. Take the standard 160mm post mount caliper to the required fitting/rotor size. Can be used with other manufacturers (but not all) disc brakes.
Shimano Disc Brake Brackets - Black / Rear 180mm IS
Front and rear Shimano disc brake adapters. Take the standard 160mm post mount caliper to the required fitting/rotor size. Can be used with other manufacturers (but not all) disc brakes.
Shimano Disc Brake Brackets - Black / Front or Rear 180mm Post
Front and rear Shimano disc brake adapters. Take the standard 160mm post mount caliper to the required fitting/rotor size. Can be used with other manufacturers (but not all) disc brakes.