Shimano EW-SD300 Di2 Cable - Black / 1000mm
The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts. E-tube STEPS EP8 uses a fully removable individual cable system enabling fine tuning with the correct cable...
Shimano EW-SD300 Di2 Cable - Black / 1400mm
The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts. E-tube STEPS EP8 uses a fully removable individual cable system enabling fine tuning with the correct cable...
Shimano Di2 EW-JC304 4 Port Junction - Black / 4-Port for 11/12spd groups
EW-JC304 E-tube cable junction for internal EW-SD300 wire routing. The 4 port Junction is required for connection of several componnts into the system with EW-SD300 wires. To be positioned neatly inside frame tubing when connected. Cables sold separately. Reliable and secure water resistant connectors.
Shimano EW-SD300 Di2 Cable - Black / 1600mm
The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts. E-tube STEPS EP8 uses a fully removable individual cable system enabling fine tuning with the correct cable...
Shimano Di2 EW-JC130 Y-Splitter Wire - Black / 250mm / 350mm / 50mm
The Shimano EW-JC130 is a Y-splitter Di2 cable. This cable connects your Di2 shifters with your junction box. It results in better and cleaner looks.
Shimano EW-EC300 Battery Charging Cable - Black / 1700mm
Di2 charger cable for the internal battery that will keep your Di2 system shifting. Di2 uses a powerful long-life 7.4V Li-Ion battery: keep it in top condition and ready for shifting with this specific Shimano Di2 charger. Charge time: 1.5 hours. Length: 1700mm. Plugs in directly to RDR9250 / RDR8150...
Sram eTap/AXS Battery Charger and Cord - Black
eTap/AXS batteries are literally a snap to remove and charge. Just flip the tool-free battery latch up and slide the battery up and out of the derailleur. Then snap the battery into the USB powered charger and connect the charger to any USB power source or A/C USB adaptor. A full charge takes just 45...
Shimano SMBCR1 Di2 Battery Charger
Shimano Di2 battery charge for the external Di2 battery. For use with Ultegra 6770 and 6870 plus Dura Ace 7970 and 9070. Requires the electric cable to plug into the mains, this is a standard lead that is used on many applicances.
Shimano SM-EW90-A 3 Port Di2 Junction Box
The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts. This junction A is required to connect the shifters via E-tube wires to the down tube junction wire. 3-port...
Shimano Di2 EW-JC130 Y-Splitter Wire - Black / 550mm / 550mm / 50mm
The Shimano EW-JC130 is a Y-splitter Di2 cable. This cable connects your Di2 shifters with your junction box. It results in better and cleaner looks.
Shimano SW-R671 Di2 Bar End Switchs - Pair - Black / Pair
Di2 technology shifting is easy and precise just a light touch is sufficient for the front or rear derailleur to instantaneously select the correct gear. Di2 electrical wires eliminates poor shifting and provides effortless gear shifts. Simply pressing tactile buttons allows effortless and comfortable...
Shimano SM-BCR2 Di2 Battery Charger for Internal Battery - USB Charger
Di2 charger for the internal battery that will keep your Di2 system shifting. Di2 uses a powerful long-life 7.4V Li-Ion battery: keep it in top condition and ready for shifting with this specific Shimano Di2 charger. 1.5 hour charge time. Plugs in directly to the SM-EW90 handlebar junction A. Can...
Shimano Di2 EW-JC130 Y-Splitter Wire - Black / 450mm / 350mm / 50mm
The Shimano EW-JC130 is a Y-splitter Di2 cable. This cable connects your Di2 shifters with your junction box. It results in better and cleaner looks.
Shimano STEPS EW-EN100 Junction A - 2x E-Tube ports - Black
E-tube D-FLY inline data transmission wireless unit. Allows information to be sent wirelessly to compatible 3rd party displays. Information can be displayed about gear position and battery level. Clean integration and installation with E-tube system. Plug tool required for inserting and removing...
Shimano EW-WU111 E-Tube Di2 Inline Wireless Unit - Black / EW-WU111
E-tube Di2 D-FLY inline data transmission wireless unit. Allows information to be sent wirelessly via ANT+ private network to compatible cycle computers. Information can be displayed about gear position and Di2 battery level. Clean integration and installation with E-tube system. Internal chip enables...