Park Tool Scw-set.3 Shop Cone Wrench Set
Industry standard cone wrenches with unmatched performance. The Y-head design puts material where it is needed for strength and durability Military grade phosphate finish ensures an accurate fit and consistent quality Thin enough to be used on the narrowest of cones High strength tool steel Long vinyl...
Park Tools Crown Race Setting System 1 Inch-1 1/8 Inch
The CRS-1 is a professional tool set for installation of crown races onto forks with 1' and 1 1/8' steering columns. Using the long strong driver tube one of the included drifts and a hammer or mallet not included the CRS-1 safely and accurately drives the crown race into its properly seated...
Park Tools Frame & Forks Straightener
A controlled way to straighten frames forks cranks and handlebars when feasible. Nylon coated hook and fulcrum to prevent paint damage The hook has up to 8' of adjustment for ideal positioning Re-enforced and super stiff design resists flexing To be used with care especially on high-end or thin-walled...
Park Tool 690-xl - Cutter Low-profile Headsets For Htr1
Facing improves the alignment of bearings in the headsetThe 690-XL has an approximate diameter of 58 mm and is a larger version of the 690 facer for facing head tubes with low profile Zero Stack type headsetsMust be used with the 768 pilot to ensure the frame is reamed and faced accurately
Park Tool Frame & Forks End Alignment Gauge Set Ffg2
Improperly aligned frame or fork dropouts can cause bent axles and quick-release skewers as well as tracking and shifting problems. The FFG-2 quickly determines whether rear frame or front fork dropouts are aligned and parallel. If an error is detected long handles and comfortable molded grips afford...
Park Tool 758.2 - Cutter And Reamer 1.5 Inch Headsets For Htr1 & Htr1b
The Park Tool 758.2 will ream and face the head tubes of bikes that use the OnePointFive Interface StandardThe 758.2 is designed for use with the Park Tool HTR-1 or HTR-1B Headtube Facer and ReamerMust also be used with the 750 Centering Cone Adaptor to ensure correct alignment1.9516-inch 49.57mm...
Park Tool Crown Race Cutting Tool
Perfect headset performance requires accurate machining of the fork crown race and this is the tool to do it. Cuts the outer edge and lower surface of the crown race seat A simple adjusting system allows the tool to be a tight fit on all forks threaded or unthreaded including those with externally butted...
Park Tool Htr1b - Head Tube Reaming And Facing Set: 1-1 / 8 Inch Included
The HTR-1B combines reaming and/or facing of the head tube to create a perfect fit for most sizes of headset cups. The HTR-1B comes complete with a 33.8mm reamer and four different size pilots 29.8mm 30.0mm 33.8mm and 36.8mm The reamer is used to clean out or increase the diameter of the head tube Most...
Park Tool Bts1 - Bottom Bracket Tapping And Facing Set
A precision tool that provides a piloted means of tapping threads in a bottom bracket shell. Includes English taps 1.370 inch x 24 tpi right hand thread for adjustable cup and 1.370 inch x 24 tpi left hand thread for fixed cup Italian thread taps 36mm x 24 tpi right hand thread are also available After...