Park Tool VP1C - Vulcanising Patch Kit
The Park Tool VP1C Patch Kit includes six thin and flexible patches with tapered edges to blend with the tube s profile. Four round patches are 25mm in diameter for smaller holes. Two oval patches, 25mm x 35mm, are for wider cuts. A tube of self-vulcanizing fluid bonds the patch to the tube at the molecular...
Park Offset Brake Wrench 14 Mm Brake Centering Tool
Part of a range of wrenches with offset heads to improve access in awkward placesSpecially shaped and sized for specific bicycle jobs especially on brakes14 mm open ended wrench on one end with lugs on the other end that locate into the tension springs on calliper brakes
A handy, four-way socket wrench that provides great leverage for nut and bolt removal and installation. The Park Tool MQ-1 Metric Quad Wrench features 15, 17, and 19mm forged sockets plus a 3/8" socket drive. Park ToolMQ-1Metric Quad Wrench Features No more lugging around a socket set, the Park...
Park Tool MLP1.2 - Master Link Pliers
Many derailleur chains use a master link that allows the chain to be installed and removed by hand. While this type of master link doesn t require a traditional chain tool, over time, dirt and corrosion can make it difficult to separate by hand. The Park Tool MLP1.2 Master Link Pliers make removal...
Makes working on wheel hubs much easierFits in the jaws of a bench viceAccepts regular front or rear axles 9 mm and 10 mmJaws will open automatically when vice is opened
ThePark Tool CC-4 Chain Checkeris a drop-in style gauge that measures bicycle chain wear.Laser cut, accurate and reliable. Park Tool CC-4 Chain Checker Features The laser cut CC-4 accurately measures a long section of chain and strategically comes in contact with the chain in three places, quickly...
The Park Tool 106 Work Tray is a great work stand accessory designed to keep tools, lubes and spare parts right at your fingertips. Features large and small compartments, lube holder and a tool/towel bar along with two receiver pods for additional accessories. The #106 installs easily utilising Park's...
Park Tool Threadless Forks Saw Guide
Cut any threadless fork steerer quickly and accurately with this handy saw guide. You can easily remove as little as 1mm from the fork steerer length for perfect headset installation and adjustment. Heat treated for long life The composite body will not damage the fork's steerer but has steel threads...
Park Tool CT-3.2 Screw Type Chain Tool
The Park Tool CT3.2 Screw Type Chain Toolis made from investment cast steel, because of the tremendous force needed to remove chain pins. Along with superior strength and durability, the CT-3 features a handy “loosening shelf” to remedy stiff links after reassembly. The fine thread and comfortable...
Park Tool AWS8C - Ball Ended Hex Wrench Set - 4-5-6mm
Park Tool introduced the bicycle world to the three-way hex wrench set over 25 years ago. Updated in 2007, the Park AWS-1 and AWS-8 have colour-coded hex wrenches that allow sizes to be quickly identified, as well as a redesigned centre handle that fits perfectly in the palm of the hand. The hexes are...
Park Tool Spoke Wrench For Mavic Wheel Systems 5.65 Mm And 7/9 Mm Sw-13
Smaller end fits 6-spline nipples with a 5.5mm outside spline diameter and 7mm thread size nipple. Commonly found on R-sys wheels Equal to the sizing of the Mavic® M40652 wrench Larger end fits 6-spline 9mm FORE drilled rim adapters Commonly found on rims such as Mavic® XM819 EX823 and Speedcity...
Park Tool RT-1 Head Cup Remover
The Park Tool RT-1 Head Cup Remover makes headset cup removal easy. The tool is pulled through the frame until the flared ends snap in behind the cup. A blow on the tool head removes the cup. Park Tool RT-1 Head Cup Remover Features The professional way to remove headset cups Pulls through headtube...
Park Tool SPA1C - Hanger Cup Pin Spanner
The Park Tool SPA1C has been designed to give maximum usefulness and versatility at the lowest possible cost. Tough, high carbon steel is used on each tool to ensure long life. Handle is vinyl coated to give a good grip. Each Pin Spanner is colour coated for easy recognition.
Park Tool Dtd-10 - Precision T10 Torx® Compatible Driver
The DTD-10 is a precision component Torx®-compatible driver machined to exact standards to ensure a perfect fit on compatible component fasteners. The stubby size of the DTD-10 provides extra control during removal and installation of delicate hydraulic brake fittings. Featuring an ergonomic CNC-machined...
Park Tool HCW-6 Headset Wrench
The popular and versatile Park Tool Headset Wrenches feature the proven “Y” head design and all headset wrench openings are laser cut to ensure a tight, accurate fit. Precise sizing is achieved by high voltage computer controlled laser technology after heat treat. Waiting until the wrench...