The Ice Toolz Essence Tool Kit has essential tools to maintain your bike. Ice Toolz Essence Tool Kit Features Crank Remover Tire Lever Set, Set of 3 Pieces 6" Forged Adjustable Wrench 9x10mm Open-ended Wrench 8mm Hex Key Wrench Shimano Compatible Chain Tool (5x6x7x8x9x10x11x12-speed)...
IceToolz Crown Race Installation Tool
TheIce Toolz Crown Race Installation Toolis a good quality and excellent value precision tool designed with durability. Enabling you to quickly and easily install a crown race. TheIce Toolz Crown Race Installation Tool Features Fits 1, 11/8" and 1.5" steerer tubes
IceToolz Headset Cup Remover 1.25-1.5in
TheIceToolz Headset Cup Remover 1.25-1.5ml. Remove headset cups from your headtube. For use with 1.25 to 1.5" headtubes.
IceToolz Precision Torque Wrench 21-105NM
The IceToolz Precision Torque Wrench is a great tool for ensuring you apply the correct torque to fasteners helping to prevent over-tightening and damage to components. Applying the correct torque to your cycle components is essential for a safe and serviceable bike. This accurate torque wrench helps...
IceToolz Internal Routing Tool
Introducing the IceToolz Internal Routing Tool. This kit simplifies the task of installing or replacing cables and hoses on frames that use internal routing. Using a combination of a large magnet, wire and magnetic barbs users are able to guide the pilot wire through the frame and then attach this to...
IceToolz Bearing Cup Press Tool
The IceToolz Bearing Cup Press Tool is for BB30, BB86 and BB386.
IceToolz BBR60 Tool External Bottom Bracket Tool Black
TheIcetoolz BBR60 External Bottom Brack Tool dor use withSHIMANO EXTERNAL BEARING BB's Icetoolz BBR60 External Bottom Bracket Tool Features For BBR60 crank adapter Cr-Mo steel Use with 1/2" driver
IceToolz Ocarina Torque Wrench
The IceToolz Ocarina Torque Wrench is a great tool for ensuring you apply the correct torque to fasteners helping to prevent over-tightening and damage to components. Applying the correct torque to your cycle components is essential for a safe and serviceable bike. This accurate torque wrench helps you...
IceToolz Press-Fit Bearing Removal Tool
The IceToolz Press-Fit Bearing Removal Tool is a press-fit bottom bracket removal tool, for use on all 24mm and 30mm press-fit bb s.For BB bearings with internal diameter of ø24 - 30mmMaterial: Cr-Mo steel
The IceToolz Crank Removal Tool features 14 and 15mm and an 8mm hex key for crank bolts and crank arm removal.Extra grip handleAttachment for square & hollow axlesIncludes 14 & 15mm sockets
The IceToolz BB Tool 12 Tooth is for FSA BB386 Evo, Hawk Racing BB3086, RaceFace Cinch, Rotor BSA30, Zipp Vuma and other external bottom bracket systems. Also fits SRAM DUB. Hardened CrMo steel. Use with 1/2" driver.
IceToolz BB Tool for External Shimano BBR60
The IceToolz BB Tool for External Shimano makes removing and fitting your Shimano Hollowtech II bottom bracket quick and easy. To be used with a half inch driver.For BBR60 crank adapterCr-Mo steelFor use with 1/2" driver
The Hollowtech 2 BB Tool. Cromo Shimano Hollowtech 2 compatible crank adapter tool. For use with 8mm hex or 3/8 driver. Hollowtech 2 BB Tool Features Cromo Shimano Hollowtech 2 compatible crank adapter tool. For use with 8mm hex or 3/8 driver.
IceToolz ISIS/Shimano BB Tool Black
TheIceToolz ISIS/Shimano BB Tool. Cromo BB tool that fits both ISIS and Shimano BB's. For use with 1/2 diver. IceToolz ISIS/Shimano BB Tool Features Cromo BB tool that fits both ISIS and Shimano BB's. For use with 1/2 diver.
The IceToolz Bosch Lockring tool for Bosch Active/Performance line e-Bikes sprockets.